The Assemblies Module
The Assemblies module is where you maintain details of the products you manufacture and calculate their exact costs.
An assembly is a
list of the component items that are needed to make a product. The assembly
and all its component items must have valid partnumbers - the...
Fri, 19 Feb, 2016 at 12:38 PM
Assemblies are entered using the assembly tool:
Partnumbers for the assembly itself and all its component items should
be entered into Hers...
Fri, 19 Feb, 2016 at 3:03 PM
You may find many of
your assemblies are very similar, with perhaps just a few different components. When using the assembly tool you can use the import pa...
Fri, 19 Feb, 2016 at 3:10 PM
In certain industries, typically
those involved with electronic assemblies, the price and availability of
components can vary widely. It is
therefore com...
Fri, 19 Feb, 2016 at 3:25 PM
The partnumber enquiry is identical to that in the Stock module - there is no need to leave the Assemblies module to look at the details of a partnumber: ...
Fri, 19 Jun, 2020 at 11:12 AM
One partnumber can be changed for
another throughout all your Herschel assemblies using the mass replace a partnumber option:
This is very ...
Fri, 19 Feb, 2016 at 3:35 PM
A major advantage of entering a product's assembly into Herschel is that you can very quickly add
up the costs of all the items that go into an assembl...
Fri, 19 Feb, 2016 at 3:43 PM
Many of the Assemblies module reports print details for a range of assemblies. This allows you to limit the amount of information listed. You should be care...
Thu, 11 Mar, 2021 at 10:58 AM